Airlink101 Switch AGSW808POE User Manual

Quick Installation Guide  
8-Port 10/100/1000Mbps Switch  
with 8-Port PoE  
Model# AGSW808POE  
Ver. 1A  
 
1.1 Package Contents  
1 x AGSW808POE  
1 x Switching Power Adapter  
1 x Quick Installation Guide  
4 x Rubber foot for shock cushioning  
1.2 Panel  
1.2.1 Front Panel  
The picture below depicts the front panel of the PoE Switch:  
Figure 1-1 Front Panel view of the Switch  
PoE Ports (Port 1~8)  
These ports are 802.3af PoE enabled ports, the PoE port will  
automatically activate when a compatible terminal is identified. The  
PoE switch will distribute power through the Ethernet ports to the  
connected PoE device. For devices that are not compatible, the  
PoE port will not supply the power to this device. This feature  
allows users to freely and safely utilize the 802.3af PoE for Power  
over LAN devices on the network. These ports support network  
speeds of 10Mbps, 100Mbps and 1000Mbps, and can operate in half  
and full-duplex transfer modes. These ports also support automatic  
MDI/MDIX crossover detection, which give the PoE switch “plug and  
play” capabilities.  
Just simply connect RJ45 network cable  
between the PoE switch and the device and it will automatically  
detect the settings of the device and adjust itself accordingly  
2
 
LED Indicators  
Comprehensive LED indicators display the status of the switch and  
the network (see Section 1.2.3).  
1.2.2 Rear Panel  
Figure 1-2 Rear Panel view of the Switch  
Power Adapter Connector: DC 48V/1.5A, AC 100~240V,  
50~60Hz  
DC Terminal: used for connection to auxiliary backup DC power,  
DC 48V/1.5A  
1.2.3 LED indicators information  
The front panel LEDs provide instant status feedback for help with  
monitoring and troubleshooting when needed.  
Power: Power Indicator  
Status  
LED  
Color  
Solid  
Blinking  
Off  
The Switch is  
power-on  
Power  
Green  
N/A  
No power  
3
 
PoE 1~8 LEDs  
Status  
LED  
Color  
Solid  
Off  
PoE port failed,  
possibly due to:  
PoE devices  
connected  
PoE 1~8  
Green  
power shortage, over  
the power adapter  
output current  
successfully  
LAN 1~8 LEDs  
Status  
Blinking  
Transmitting/  
Receiving data 10M network or  
LED  
Color  
Solid  
Off  
Connected to  
LAN  
1~8  
Connected to  
100M  
Green  
on 100M  
network  
no device is  
connected  
100TX  
network  
Transmitting/  
Connected to  
LAN  
1~8  
Connected to  
1000M  
Receiving data 10M network or  
Green  
on 1000M  
network  
no device is  
connected  
1000TX  
network  
4
 
1.3 Technical Specifications  
Standards  
IEEE 802.3 10BASE–T, IEEE 802.3u 100BASE–TX and IEEE  
802.3af (PoE)  
Ports  
8 x 10/100/1000Mbps Auto-Negotiation RJ45 Port with 8 PoE ports  
Access Method  
CSMA/CD  
Transmission Method  
Store and Forward  
Topology  
Star  
SRAM Buffers  
Embedded SRAM for packet storage  
1024-entry look-up table in direct mapping mode  
Embedded 16-entry CAM for hash collision mapping  
Jumbo Frame  
Optional maximum packet length of 1536/1522 bytes  
Data Transfer Rate*  
Ethernet: 10/20Mbps – Half/Full-Duplex  
Fast Ethernet: 100/200Mbps – Half/Full Duplex  
Giga Ethernet: 1000/2000Mbps – Half/Full Duplex  
PoE Budget  
Up to 15.4W max. per PoE port  
PoE Power on RJ45  
Pin 1, 2,3, 6  
Dimensions  
146(W) x 84.1(D) x 42(H) mm  
Power Consumption  
6.3 watts. (max. no PD device connected)  
64 watts (max. with 12.95W PoE device connected)  
Physical and Environmental  
Power Adapter: 48V DC / 1.5A, 100~240V AC, 50~60Hz  
Operation Temperature: 0 °C ~ 50°C  
Storage Temperature: -10°C ~ 70°C  
5
 
Humidity: 5% ~ 90% RH, non-condensing  
2. Installing the Switch  
The site where you place the switch may greatly affect its performance.  
When installing, take the following into your consideration.  
2.1 Installation  
The setup of the switch can be performed using the following steps:  
Visually inspect the DC jack and make sure that is fully secured  
to the power adapter  
Make sure that there is proper heat dissipation and adequate  
ventilation around the Switch. Do not place heavy objects on the  
Switch.  
2.2 Desktop or Shelf Installation  
When installing the Switch on the desktop or shelf, please attach the  
rubber feet to the Switch. Peel off the protective paper on the pads and  
attach them on the bottom of the Switch (one at each corner).  
6
 
3. Connecting the Switch  
3.1 Connection  
The Switch supports 8 10/100/1000Mbps Ethernet ports and all of  
the 8 ports are PoE enabled ports. These PoE ports will  
automatically activate when a compatible terminal is identified. The  
Switch will supply power through the Ethernet port to the connected  
PoE powered device (PD). For legacy devices that are not  
compatible, the PoE port will not offer power to this device. This  
feature allows users to freely and safely mix legacy and PoE devices  
on their network.  
The Switch supports 10Mbps Ethernet, 100Mbps Fast Ethernet and  
1000Mbps Giga Ethernet; and it runs both in half and full duplex  
mode using two pair of Category 5 cable. These RJ45 ports are  
Auto-MDI type port. The Switch can auto negotiate the MDI-II or  
MDI-X type, so you can connect any RJ45 cable regardless if it is a  
standard or crossover cable.  
7
 
Technical Support  
*Network conditions and environmental factors as well as network overhead lower  
actual data throughput rate. Specifications are subject to change without notice.  
Photo of product may not reflect actual content. Copyright © 2011 AirLink101®. All  
rights reserved. AirLink101®, the stylized AirLink101® logo, specific product  
designations, and all other words and logos that are identified as trademarks  
and/or service marks are, unless noted otherwise, the trademarks and service  
marks of AirLink101®. All other product or service names are the property of their  
respective holders. AirLink101® products are protected under numerous U.S. and  
foreign patents and pending applications, mask work rights, and copyrights.  
8
 

Abbott Diabetes Care Blood Glucose Meter ART06986 User Manual
Acomdatacom Personal Computer The Executive User Manual
Aico Smoke Alarm RFD User Manual
Air King Ventilation Hood AK100FL User Manual
Airlink101 Switch AGIGA5SW User Manual
Alliance Laundry Systems Speaker 9001889R7 User Manual
ATK Motorcycles Motorcycle 406 User Manual
Audiovox Car Satellite Radio System XDRC2 User Manual
Behringer Musical Instrument PROMIXERDX626 User Manual
Beko Flat Panel Television 40WLU530HID User Manual